Toro 23825, Operator'S Manual

Page: 32 / 128

Loader-calibration Screen
To access this screen, press button number 6 on the
Main-selection Screen (page 30) .
This screen allows you to calibrate the loader cam or to
calibrate the loader arm.
This screen also allows you to adjust the cam-stop positions,
ensuring that the cam is in line with the pipe row.
Press the following buttons to calibrate the loader cam or
loader arm:
•
Press button number 1 to calibrate the loader cam ( Figure
29 ).
•
Press button number 2 to calibrate the loader arm ( Figure
29 ).
1
2
3
4
5
6
7
8
OK
ESC
g025090
1
2
3
Figure 29
Loader-calibration Screen
1. Calibrate loader cam 3. Return to the
Main-selection Screen
2. Calibrate loader arm
Loader-cam-calibration Screen
To access this screen, press button number 1 on the
Loader-calibration Screen (page 32) .
This screen allows the user to set the row positions for the
pipe holder.
Press the following buttons to set the desired position:
•
Button 1—Set position 1 ( Figure 30 )
•
Button 2—Set position 2 ( Figure 30 )
•
Button 3—Set position 3 ( Figure 30 )
•
Button 4—Set position 4 ( Figure 30 )
To set the load or unload position, press button number 5
(
Figure 30 ).
Figure 30
Loader-cam-calibration Screen
1. Set position 1
6. Return to the previous
screen
2. Set position 2 7. Loader cam not set (X in
circle)
3. Row number 8. Set position 3
4. Row selected check mark 9. Set position 4
5. Set load/unload position
32