Lubrication
Greasing the Machine
Service Interval:
Before each use or daily (Grease
immediately after every washing).
Grease type:
General-purpose grease.
1.
Park the machine on a level surface, stop the engine,
and remove the ignition key.
2.
Clean the grease fittings with a rag.
3.
Connect a grease gun to each fitting.
4.
Pump grease into the fittings until grease begins to
ooze out of the bearings (approximately 3 pumps).
5.
Wipe up any excess grease.
Figure 104
Cylinder assembly (view from under machine, near
stabilizer foot)
Figure 105
Track frame (repeat on other side)
Figure 106
Front elevator assembly (top view)
Figure 107
Rear elevator assembly (top view)
Figure 108
Front pipe-loader cam area (6 fittings)
83
