125-6125
1.
Warning—read the
Operator’s Manual
.
6.
Press and hold to move
the drill carriage at high
speed up or down the drill
frame.
2.
Explosion hazard;
electrical shock
hazard—do not dig before
calling local services.
7.
Mode I—spin drill spindle
clockwise. Mode II—left
trigger pressed, open the
lower wrench (stationary
wrench); left trigger
released, raise the pipe
elevator.
3.
Press to apply thread-joint
compound.
8.
Mode I—spin drill spindle
counterclockwise. Mode
II—left trigger pressed,
close the lower wrench
(stationary wrench); left
trigger released, lower the
pipe elevator.
4.
Press and hold for
maximum drilling fluid
pressure; release to stop
the flow.
9.
Thrust the drill carriage
forward.
5.
Press to turn the
drilling-fluid pump on
or off.
10.
Pull the drill carriage
rearward.
125-1641
1.
Forward left
6.
Forward right
2.
Increase rpm
7.
High
3.
Engine speed
8.
Track speed
4.
Decrease rpm
9.
Low
5.
Reverse left
10.
Reverse right
125-1621
1.
Press the operator presence switch to enable machine
movement.
125-1622
1.
Pull up to start the engine.
2.
Push down to stop the
engine.
17
