Toro 23825, Operator'S Manual

Page: 112 / 128

Figure 159
1. Antifreeze-tank cap 2. Antifreeze tank
D. Ensure that the tank is full of antifreeze ( Figure
159 ).
3. Circulate the antifreeze as follows:
A. Open the antifreeze valve inside of the rear
compartment (
Figure 160 ).
Figure 160
1. Antifreeze valve
B. Open the valve near the rear compartment ( Figure
161 ).
Figure 161
1. Valve (open position)
C. Start the machine and turn On the drilling-fluid
pump.
D. Add antifreeze to the tank as needed ( Figure 159 ).
E. When the antifreeze comes out of the drill spindle
(
Figure 157 ), turn the pump off.
4. Turn the machine off.
5. Install the cap onto the antifreeze tank ( Figure 159 ).
6. Close the antifreeze valve ( Figure 160 ).
112