IT
2
2.1
4
K200T-K280T
1.5
SERVICING
1.4
USER
The user must not open the casing or perform any operations restricted to maintenance personnel or specialized experts.
In case of breakdown or malfunction of the door, the user should simply switch off the circuit breaker and abstain from any
attempt to repair the system.
The user must be able to operate the automation under normal conditions and perform simple operations or startup or
resetting the automation following any forced interruptions, using the devices provided (digital switch, analogue switch,
etc.).
Use of the automation must be exclusively permitted to users who comply with the instructions in this manual and in the
manuals of the TOPP devices connected to it.
Contact the installation technician or retailer for assistance.
TECHNICAL DESCRIPTION
RATING PLATE AND “CE” MARKING
The “CE” marking certifies the conformity of the machine to the essential health and safety requisites foreseen by the
European product directives.
It is formed of an adhesive plate made from polyester, screen-printed black, with the following dimensions: W=50mm -
H=36mm.
It should be applied by the installation technician in a clearly visible position on the outside of the automation unit.
INSTRUCTIONS FOR INSTALLATION AND USE
EN
&
The installation technician shall accept full responsibility for any installation errors and for any failure to adhere to the
instructions provided in this manual. The installation technician shall therefore be exclusively liable for any damages
caused to users and/or third parties that may arise as a result of incorrect installation.
&
The installer must also supply the owner with all information regarding automatic, manual and emergency function of
the automation.
2.2
PROPER USE
The recovery action must be taken into account in applications where there are features that provide access
control with inputs different from those of the radar (example reader bedge) for which automation could not
ensure the operating mode set.
It is strictly forbidden to use the automation for purposes other than those described herein, in order to guarantee at all
times the safety of the installer and user and the correct function of the automation.
The automation in order to perform the above, if set in a mode other than "Closed", perform a reset called "Near"
that provides for the complete opening and closing of the doors at a low speed, before returning in the set state the
function selector.
The K200T/280T automation mechanism was designed and produced exclusively to operate (open and close) linear
sliding doors in residential, public and industrial buildings.
events as described in chapters 5.8-5.10.
The door may be used in escape routes only if equipped with anti-panic break-through systems. It must be possible to
break through in the direction of escape no matter what the position of the door.
In case you want to exclude the auto recovery please contact support Topp Srl.
The automation software is designed to perform automatic recovery in the instance where anomalous