Fig.
15
Slow wing,opening toward the left
3.5
ADJUSTMENT OF TROLLEYS AND ASSEMBLY OF BELT ON SLOW WING
10
65
RCP
RCA
Slow wing back
LAL
CAL
Fig.
16
10
65
LAL
RCP
RCA
CAL
RGC
Wrench supplied
RGC
Belt joint plate
Internal
side
Internal
side
CAL
CAL
15
K200T
-K280T
INSTRUCTIONS FOR INSTALLATION AND USE
EN
Slow wing, opening toward the left (Fig.15):
Note! Tightening should not be excessive as it functions as a driver for the slow wing and not as drive traction like the
fast wing.
@
To tighten the belt CAL turn the adjustment wheel RGC counterclockwise with the special wrench supplied to
obtain a minimum provisional tightening, then partially tighten the screws on bracket RCA .
Note! Final tightening will be done only after assembling and adjusting the wings on the crossbar.
After assembling and adjusting the trolleys on the wing, loosen the screws of the bracket RCA and assemble the belt
CAL on the pulleys of the transmission brackets RCP and RCA.
Note! The belt joint plate must be facing toward the inside of the door.
Slow wing, opening toward the left (Fig.16):
@
To tighten the belt CAL turn the adjustment wheel RGC clockwise with the special wrench supplied to obtain a
minimum provisional tightening, then partially tighten the screws on bracket RCA .
Slow wing,opening toward the right
Internal
side
Wrench supplied
Internal
side
Slow wing back
Belt joint plate
Note the direction
of installation