Topcon KR-1W, Instruction Manual

Page: 43 / 188

41
BASIC OPERATIONS
7
If the alignment position with the patient's pupil is not correct, adjust the alignment by tap-
ping on the control screen or by operating the control lever. When realignment is com-
plete, the final alignment and focusing operations will start automatically and
measurement is done.
8
After finishing the measurement, the results are displayed on the Control Panel screen.
• It will take a few seconds for measurement to be fully complete, and display the final
results.
9
When all the set measurements are done, the screen is changed to the Measurement
Result List screen.
Auto print (available only under Auto mode)
When the auto print function is set to "ON" in the initial settings menu, measurements will
automatically print out when the exam is completed.
Note, if the measurement to be performed is set for only the right or left eye (MONO), the
auto print function will not work. For the setting of eyes to be measured, see "MEASUR-
ING ONE EYE ONLY" on page 35.
It is possible to not automatically move to the position for measuring the other eye after
measuring one eye. For details, see "MEASURING ONE EYE ONLY" on page 35.
If MONO mode is selected, total measurement is completed after measurement of the
selected eye is performed.
After "FINISH" is displayed, it is possible to continue measurement by pressing the
MEASUREMENT switch .
To stop the auto alignment, tap MANUAL and stop the auto measurement. To
resume the auto measurement, tap AUTO .