Topcon KR-1W, Instruction Manual

Page: 115 / 188

113
FUNCTION SETTING USING SETTINGS
FOGGING DURING CONTINUOUS MEASUREMENT (CONT. FOG)
When multiple measurements are selected for setting the number of continuous measure-
ments, the option to perform fogging in ONLY the first measurement or to perform fogging for
each measurement may be selected. Before shipment, the default setting is "ALWAYS."
1
Tap the Set Condition button of the set item display "Cont. Fog" of "INITIAL."
1/ 3
SETTINGS
ALWAYS
ONCE
DISPLAY
PRINT INT
PRINT EXT
COMM
NETWORK
SPECIAL
EXIT
INITIAL
MEASURE Init Measure Mode
Init Auto
R-L Measure
Cont. Cycle
Cont. Fog
Finish Mode
Target Brightness
VD
ZernikePD
R/K
MANUAL
MONO
3
ONCE
R
LEVEL3
12mm
Use pupil
2
Tap the Setting Change button and select "ALWAYS" or "ONCE."
"Always"
: Fogging is performed with each measurement.
"Once" : Fogging is performed only in the 1st measurement.
3
Setting is done.
SETTING THE WAITING POSITION AFTER MEASUREMENT (FINISH MODE)
It is possible to set the waiting position (Right or Left eye) of the measuring head after finishing
each measurement. Before shipment, the default setting is "R" (initial position for measuring
right eye).
1
Tap the Set Condition button of the set item display "Finish Mode" of "INITIAL."
1/ 3
SETTINGS
R
L
FINISH
MEASURE
DISPLAY
PRINT INT
PRINT EXT
COMM
NETWORK
SPECIAL
EXIT
INITIAL
Init Measure Mode
Init Auto
R-L Measure
Cont. Cycle
Cont. Fog
Finish Mode
Target Brightness
VD
ZernikePD
R/K
MANUAL
MONO
3
ONCE
R
LEVEL3
12mm
Use pupil
2
Tap the Setting Change button and select the desired measurement mode:
"R"
: Waiting at the initial position for right eye measurement
"L" : Waiting at the initial position for left eye measurement
"FINISH" : Waiting at the away position of the last eye measured; i.e. the device will
move away from the last eye measured.
3
Setting is complete.