Topcon KR-1W, Instruction Manual

Page: 8 / 188

CAUTION
Icon Description Page
To avoid injury, when moving the chinrest up/down, keep fingers
away from moving parts.
8
To prevent damage and injuries, do not install the instrument on an
uneven, unsteady or sloped surface.
26
To avoid electrical shock, do not handle the power plug with wet fin-
gers.
27
To avoid failure or potential injury, do not open the printer cover
while the printer is in operation.
29
154
To avoid potential injury in case of malfunction, including a paper
jam, be sure to shut off the power before attempting to repair it.
29
154
Never insert your fingers under the chinrest.
* Inform the patient of this, too.
Careless insertion of fingers may cause injury by pinching.
38
When operating the instrument, be careful not to touch the patient's
eye or nose.
8
When moving the instrument, be sure to hold it at the base with two
persons. Carrying by one person may cause harm to his back or
injury by falling parts. Also, holding areas other than the base may
cause injury, as well as damage to the instrument.
26
When setting an instrument on an instrument table, pay attention
not to injure the patient's fingers between the instrument and the
table.
26
To avoid potential injury, do not touch the internal printer body while
the printer is in operation or when replacing the printer paper.
29
154
This instrument has been tested (with 100/120/230V) and found to
comply with IEC60601-1-2: Ed.3.0: 2007.
This instrument may emit a radio frequency energy (within the stan-
dard) and cause an adverse effect on the devices located nearby.
When such effect is confirmed by the ON/OFF operation, a proper
treatment as to change the direction, use another outlet, etc. is rec-
ommended. If the problem remains unsolved, call your dealer.
—
6