Topcon KR-1W Instruction Manual Download Page 102

Page: 102 / 188

100

FUNCTION SETTING USING SETTINGS SCREEN

Auto Print

After finishing R-L auto measurements, results are

printed out automatically.

116

OFF

Not printed automatically.

Internal Printer

USE

Internal printer is used.

USE

116

OFF

Internal printer is not used.

External Printer

USE

External printer is used.

OFF

117

OFF

External printer is not used.

Patient ID Reset

Patient ID is reset upon power on.

117

OFF

Patient ID is not reset upon power on.

Patient ID

Set.Set by keyboard

display.

String of up to 31 characters

118

Patient ID Out TV

Patient ID is displayed on the monitor.

118

OFF

Patient ID is not displayed on the monitor.

KR No.

00 - 99

Sets the machine No.

118

KR Out TV

KR No. is displayed on the monitor.

OFF

118

OFF

KR No. is not displayed on the monitor.

Buzzer

Buzzer sounds.

119

OFF

Buzzer does not sound.

Date Style

Y/M/D

Date display on analysis result/printout is arranged in

order of year/month/day.

Y/M/D

119

M/D/Y

Date display on analysis result/printout is arranged in

order of month/day/year.

D/M/Y

Date display on analysis result/printout is arranged in

order of day/month/year.

Date/Time

Set by ten-key display.

Year, month, day, time (24hrs), minute and second

10min

120

Auto Shutoff

OFF

Power save function is not used.

1min

Power save status in 1min of last operation.

5min

Power save status in 5min of last operation.

10min

Power save status in 10min of last operation.

20min

Power save status in 20min of last operation.

30min

Power save status in 30min of last operation.

60min

Power save status in 60min of last operation.

LCD Brightness

-3

Sets the brightness of LCD monitor, using up/down

buttons.

121

-2
-1

+1
+2
+3

Language

English

Monitor is displayed in English.

English

121

Japanese

Monitor is displayed in Japanese.

Packing Mode

Set.

Machine is arranged for packing.

122

Pupil Distance

Set by ten-key display.

Set the distance of right and left eyes.

122

Progress

Measure

Performs progress measurement.

OFF

123

OFF

Progress measurement is not done.

Set item display

Setting Change button

Set contents

Initial value

Page

Summary of Contents for KR-1W





























































































































































































Search results

Summary of Contents for KR-1W

Reviews:

Related manuals for KR-1W

Brands by name

Popular brands

Topcon KR-1W, Instruction Manual

Search results

Summary of Contents for KR-1W

Reviews:

Related manuals for KR-1W

Brands by name

Popular brands