Topcon KR-1W, Instruction Manual

Page: 120 / 188

118
FUNCTION SETTING USING SETTINGS SCREEN
SETTING THE PATIENT ID
It is possible to set the initial value for patient ID (which is set upon power on, when tapping
the CLEAR button when the setting of "Resetting the Patient ID" is "ON," or when pressing the
MEASUREMENT switch after printing/outputting measurement values).
1
Tap the Set Condition button of the set item display "Patient ID" of "INITIAL." The key-
board screen is displayed.
2
Tap the displayed keyboard, enter the patient ID to the input display.
The cursor of the input display is highlighted in orange.
It is also possible to move the cursor by directly tapping the part to be changed.
Input display
Keyboard
3
Setting is complete by pressing the OK button .
DISPLAYING THE PATIENT ID (SERIAL OUT TV)
It is possible to set whether or not to display the patient ID. Before shipment, the default setting
is "ON."
1
Tap the Set Condition button of the set item display "Patient ID Out TV" of "INITIAL."
The keyboard screen is displayed.
2
Tap the Setting Change button and select "ON" or "OFF."
3
Setting is complete.
SETTING THE MACHINE No. (KR No.)
The machine No. can be set.
1
Tap the Set Condition button of the set item display "Setting the Machine No." of "INI-
TIAL."
2
Enter the number by the ten-key display of the Setting Change button .
3
Setting is complete by pressing the OK button .
DISPLAYING THE MACHINE ID (KR OUT TV)
It is possible to set whether or not to display the machine No. Before shipment, the default setting is
"OFF."
1
Tap the Set Condition button of the set item display "Displaying the Machine ID" of "INI-
TIAL."
2
Tap the Setting Change button and select "ON" or "OFF."
3
Setting is completed by pressing the OK button .