Topcon KR-1W, Instruction Manual

Page: 133 / 188

131
FUNCTION SETTING USING SETTINGS
SETTING THE CENTER VALUE WHEN TOPOMAP SCALE TYPE IS ADJUSTABLE
(TOPOMAP SCALE - ADJUSTABLE)
The center value when the TopoMap scale type is Adjustable is set. The value can be set
between 30.00D and 50.00D with 0.50D steps. Before shipment, the default setting is "47.50."
1
Tap the Set Condition button of the set item display "TopoMap Scale - Adjustable" of
"DISPLAY."
2
Enter the number by the ten-key display of the Setting Change button .
3
Setting is completed by tapping the OK button .
SETTING THE STEP WHEN TOPOMAP SCALE TYPE IS ADJUSTABLE
(TOPOMAP SCALE - ADJUSTABLE STEP)
When the TopoMap scale type is set to Adjustable, the step can be set between 0.25D and
2.50D with 0.25D steps. Before shipment, the default setting is "1.50."
1
Tap the Set Condition button of the set item display "TopoMap Scale - Adjustable Step"
of "DISPLAY."
2
Enter the number by the ten-key display of the Setting Change button .
3
Setting is completed by tapping the OK button .
SETTING THE STEP WHEN TOPOMAP SCALE TYPE IS ABSOLUTE
(TOPOMAP SCALE - ABSOLUTE STEP)
When the TopoMap scale type is set to Absolute, the step can be set between 0.50D and
2.50D with 0.25D steps. Before shipment, the default setting is "1.50."
1
Tap the Set Condition button of the set item display "TopoMap Scale - Absolute Step" of
"DISPLAY."
2
Enter the number by the ten-key display of the Setting Change button .
3
Setting is completed by tapping the OK button .
SETTING THE TOPOMAP OVERLAY - CROSS SCALE
When analysis results are initially displayed, TopoMap Overlay - Cross Scale can be set to ON
or OFF Before shipment, the default setting is "ON."
1
Tap the Set Condition button of the set item display "TopoMap Overlay - Cross Scale" of
"DISPLAY."
2
Tap the Setting Change button and select "ON" or "OFF."
3
Setting is complete.