Topcon ALADDIN HW3.0, User Manual

Page: 16 / 170

ALADDIN
- User manual Rev. 19 EN of 10/07/2019
16

The purpose of ALADDIN HW3.0 connection to an IT network is report printing and remote technical
assistance.

The ALADDIN HW3.0 USB port must be connected to printer with USB or LAN interface. Ask Topcon
technical assistance for printer driver installation.

The ALADDIN HW3.0 can be connected to a Local Area Network (LAN) through the LAN connector. The
network must have Ethernet protocol (IEEE 802.3). Ask Topcon technical assistance and the system
administrator for ALADDIN HW3.0 and network settings.

The purpose of ALADDIN HW3.0 connection is saving PDF report on an external network folder or
technical service intervention on the machine.

Connection of ALADDIN HW3.0 to a computer network that includes other equipment could result in
previously unidentified RISKS; identify, analyse, and control such RISKS (refer to IEC 60601-1:2005).

Subsequent changes to a computer network could introduce new RISKS and require new analysis.

Changes to the computer network include:
-
Changes in computer or data network configuration
-
Connection of additional items to computer network
-
Disconnecting items from computer network
-
Update of equipment connected to computer network
-
Upgrade of equipment connected to computer network

The term computer network used here corresponds to the term network/data coupling in IEC 60601-
1:2005.

Do not change the Ethernet settings “Local Area Connection 2” adapter.
If specific configuration for LAN network is needed in the settings can be modified accordingly on “Local
Area Connection” Ethernet adapter.
4.5 Transport and packaging

The device must be transported and stored in its original packaging.

For the storage and transport conditions, refer to the relative section in this document.

Carefully keep the original packaging in order to use it if you need to transport the device.

To move the device for short distances (without packaging) and to insert it in and remove it from the
original packaging, grip the device with both hands, one on the front headrest arch and the other in the
recess on the rear of the device (where the locking system is).

Completely unscrew the two locking screws and the semi-lock (Figure 2) before use.

Lower the instrument to its minimum height using the joystick, then lock ALADDIN HW3.0 using
the semi-lock and the two locking screws for transportation (Figure 2).
4.6 Cleaning

Regularly clean dust off the device using a soft cloth. For more persistent superficial dirt, use a soft cloth
dampened with water or alcohol at maximum 70%.

Be careful not to get the device wet and clean it only as indicated to prevent damaging it. Never
use solvents or other abrasive agents.

The device comes with a dust cover to be used to protect it. Cover ALADDIN HW3.0 if it is not going to
be used for a long period of time.