ALADDIN
- User manual
Rev. 19 EN of 10/07/2019
109
12.5 Pupillometry (PUP)
The pupillometry module allows displaying and analyzing the dynamic and static pupillometry (pupil images
acquired in controlled light conditions).
Normally, if the pupillometry is acquired, the software goes into dynamic mode (Figure 70).
Figure 70
Click on
“
OD
”
or
“OS”
to display the pupillometry of the right or left eye, respectively.
With the patient's eye in view, buttons are located below the home screen. These buttons are used to
navigate between the acquired frames. The current frame is shown next to the buttons.
Below a summary of the functions available on this screen:
Display
Ring Center: Shows the position of the fixation point
Pupil: Shows the blue ring, which highlights the pupil's edges
Grid: Shows an overlaid grid
Rulers: Shows calibrated rulers
Sequences
The user can select the sequence of images to be displayed using the buttons at the top:
-
Dynamic Clicking on the "Dynamic" button to display the dynamic pupillometry in the left column,
the following information will also be displayed:
Summary of Contents for ALADDIN HW3.0
