87
High mount stop lamp disassembly:
1. Remove the screw.
2. Rotate the lamp receptacle; remo ve the wire harness with
the bu lb.
3. Check the continuity,
Replace the bulb assembly with wire harness in case of
un-continuity.
High mount stop lamp installation:
Back to removal steps
Wiper removal:
1. Take ou t the key from the key switch.
2. Apply the parking brake.
3. Tu rn To w/Ru n switch to TOW.
P lea se refer to Chapte r 1
“Protection for Electrical
Safety”
.
4. Disconnect the wiper.
5. Remove the wiper arm.
6. Remove the fixing nu t of wiper motor.
