86
Tail light removal:
Any defective o r dim tail light shall be replaced.
1. Take ou t the key from the key switch.
2. Apply the parking brake.
3. Tu rn To w/Ru n switch to TOW.
P lea se refer to Chapte r 1
“Protection for Electrical
Safety”
.
4. Remove the tail light with a flat head screwdriver.
CAUTION:
Don't break the 4 snaps o n the lens, the tail light mu st be
replaced if any of them is b ro ken.
5. Disconnect the wire.
Tail light installation:
Back to removal steps
High mount stop lamp removal:
1. Take ou t the key from the key switch.
2. Apply the parking brake.
3. Tu rn To w/Ru n switch to TOW
P lea se refer to Chapte r 1
“Protection for Electrical
Safety”
.
4. Remove the screw with a screwdriver.
5. Disconnect the co nnector o f the high mount stop lamp.
