72
Install:
No te the following:
1.
Lubricate
：
·
Bearing
○
1
·
Rack
○
2
·
Pinion shaft
○
3
·
Oil seal
○
4
Apply a thin laye r of g rease
Install:
·
In the reverse order of the remo val procedures. Refer to
the schematic diagram of system parts.
Adju st the tightening to rque of the cover:
1.5 -2 Nm (1 .1 ft·1b-1.48 ft·1 b)
NOTICE: The steering gear shou ld have no clamping
stagnation when the left and right racks turn to the final
positio ns. When they retu rn to the middle position, the free
gap of the steering wheel should be 45mm, o r else the steering
gear assembly mu st be replaced.
Adju st the tightening to rque of lo cknut
：
39 Nm(28.8ft·1b)