54
·
Brake shoe plate thickness
Refer to Chapter 2. In case of non-compliance with
the specification, replacement is to be made.
2.
Inspect
·
Bo ttom plate of brake shoe plate
·
Brake drum
In case of deformation/scrape/damage, replacement
is to be made.
·
Half axle assembly of rear axle
In case of scrape/bending/deformatio n, the wheel is
to be replaced.
NOTICE:
We do not recommend the replacement of bearing and
bearing sleeve as an individual part.
Du ring the o peration, the quality of fit between half shaft
and bearing or bearing sleeve may deteriorate. In this
case, we usu ally recommend the replacement o f a new
rear axle half shaft assembly. In additio n, due to the
complex internal structu re o f the brake, we recommend
that the maintenance personnel replace or adjust one
brake with ano ther o ne as the reference during the
service.
·
Rear axle tu be
In case of scrape/bending/damage, replacement is to
be made.