STAC6 Drives and Microstepping Motors:
User Manual
(Discontinued Product)
• 1.31 •
1:
H A R D W A R E
CONNECTING AN INPUT TO A SWITCH OR RELAY
Figure 1.35: Switch In/Out 2
Use a normally open momentary switch to trigger the drive using
the "Wait Input" instruction.
Use a single throw switch for parameter selection using
the "If Input" instruction.
Use a normally open momentary switch for jogging.
CONNECTING ANOTHER Si DRIVE
Figure 1.36: Output In/Out 2 – When output closes, drive input goes low.
