7
7-2. DC IN/SYNC connector
(1)Compatible connector: HR10A-10P-12S (HIROSE ELEC.)
(2)Pin layout
Pin No.
Signal Name
1
DC12V GND
2
DC12V
3
VIDEO GND
4
VIDEO 1 OUT
5
GND
6
HD IN
7
VD IN
8
VIDEO GND
9
VIDEO 2 OUT
10
WEN OUT
11
TRIG IN
12
PARTIAL IN (OPTION)
*1: The 12 pin is provided for partial signal input under optional partial-scan mode.
l
The function/features noted as “option” or shown with the OPTION mark in this document is
available as optional function/feature (= Production on order) and not provided as standard
function. Please contact our sales staff for details.
l
Under standard version, partial-scan function is not available. (Normal mode only)
*2: Before connecting / disconnecting your connector, make sure to confirm that the power of power supply unit is
in OFF position to avoid breakdown.
*3: The GND pin is grounded to the camera chassis.
8. Function of Each Switch / Mode
8-1. Camera function
8-1-1 GAIN selection (See 8.2 for setting details) [Camera rear-panel DIP SW]
--- Switches sensitivity setting
(a) FIX: Factory-prefixed gain
(b) MANU: Gain is adjustable via the manual gain potentiometer (M.GAIN)
8-1-2 Video output mode selection (See 8.2 for setting details) [Camera rear-panel DIP SW]
--- Switches video format
(a) 1/100I: 1/100s ----- 2:1 Interlace mode (Dual tap)
--- ODD field images and EVEN field images are output in 1/100 second in interlace mode
via VIDEO 1 OUT and VIDEO 2 OUT.
VIDEO1 OUT
VIDEO2 OUT
Image A
ODD
Image B
EVEN
Image C
ODD
Image E
ODD
Image D
EVEN
Image D
ODD
Image A
EVEN
Image B
ODD
Image E
EVEN
Image C
EVEN
ODD Phase
EVEN Phase
ODD Phase
ODD Phase
EVEN Phase
ODD Phase
EVEN Phase
ODD Phase
EVEN Phase
ODD Phase
WEN OUT
