D3000000A
Avoid
Do NOT pull the cord itself
When disconnecting the power-plug out of the outlet, make sure to hold the plug,
and then pull it out. Do NEVER try to pull the cord itself. Otherwise, the cord
may be damaged or broken, leading to a fire or an electric shock accident.
Avoid
Do NOT handle the power cord with your hand in an wet condition.
Do NOT plug in/out the power cord with an wet hand. Otherwise, it may cause an
electric shock accident.
Avoid
Do NOT block ventilating slits.
You should avoid;
n
Placing your device upside down, or with wrong side up.
n
Installing your device in a poor natural draft condition, recessed area.
n
Placing your device on carpet, cushion.
n
Putting a tablecloth, curtain on your device.
Blocking the ventilation slits prevents inner heat from escaping, which might lead
to a fire accident.
Avoid
Do NOT place your device too close to a heater.
Do NOT place your device or its power cord too close to any heating appliance.
Otherwise, the coating of its switch and/or power-cord may melt, leading to a fire
or an electric shock accident.
Avoid
Do NOT use chemical solvent for cleanup.
When giving your camera a cleanup, avoid using a benzene, alcohol, and thinner.
These chemicals might cause its coating or markings to come off or become
degraded.
Avoid
Do NOT “hot-plug” the connector.
Before connecting/disconnecting a connector, make sure that the power of a
power unit is turned OFF. Otherwise, it may cause a malfunction or an electric
shock accident.
