D3000000A
Avoid
Do NOT place the device unstably.
Do NOT place the device on an unstable table, slanted surface, etc.. Make sure
that the device do not fall nor roll over to prevent an accident.
Avoid
Do NOT place any potentially-hazardous things on this device.
Do NOT place any things on the device which may, if it gets into the inside of the
body, damage the inner parts of the device (such as a flower vessel, glass,
cosmetics, a container filled with liquids or chemicals, as well as small metal parts,
etc.). If tumbled, the liquids inside the bottle, etc. may get into the chassis, causing
fire or electric shock accident.
Avoid
Do NOT insert any foreign object through air-vent
Avoid inserting any foreign object, especially metal part, combustible, through
ventilation slits. To do so may cause fire or electric shock accident.
Avoid
Do NOT damage the power cord.
Do NOT damage, break, re-process, nor bend forcefully the power cord. Pulling
forcefully/Twisting/Placing a heavy object on/Applying heat on the cord should
also be avoided. Otherwise, the cord may be damaged, causing a fire or an electric
shock accident. If the cord is damaged, contact us or our dealer/distributor from
which you purchased this device for repair service.
Avoid
Do NOT remove the protective cover
Avoid removing its protective cover. If you touch the inner high-voltage part, you
might get electrically shocked. For inner part/circuit checkup, maintenance, or
repair, contact us or the dealer/distributor from which you purchased this device.
Handling Precautions
CAUTION
Unplug
Unplug the power-plug when the your device is not in use.
For safety, make sure to unplug the power-plug before you give your device a
cleanup, or when it is not used. Keeping the power-cord connected might invite
fire or electric shock hazard.
Avoid
Do NOT expose your device to direct sunlight, nor intensive heat.
Do NOT place this device where it is exposed to direct sunlight, dust, or in a high
temperature condition. To do so may cause the inner temperature of the device to
go up, resulting in burning-down of inner parts, circuits or fire accident.
Avoid
Do NOT attempt to make connection before turning power off
Make sure to check the CCU power is OFF before connection. Otherwise, you
might get an electric shock.
