Toho Electronics TRM-10C, Instruction Manual, Page: 89 / 129

―
88
―
HXPRM10mnCT002E
7.2.7 Setting the Communication Function
Set Protocol, Set Local Address, Baud Rate (communication speed), Data Length, Parity Bit, and
Stop Bit.
Example) Original protocol,Local Address: 02, Baud Rate: 1200bps, Data Length: 7 bit, Parity Bit:
even, Stop Bit: 2 bit
Enter the engineering mode (See the key operation
in page 78).Use the
△
key to indicate “
", and
press the
“
ENT
”
key.
Use the
△
key to display
“
", and press
the
“
ENT
”
key.
（ Select from “
Original
）
",
“
Modbus-RTU
）
"
）
Use the
△
key to indicate " ", and press
the
“
ENT
”
key.
（
Select from
Use the
△
key to indicate " ", and press the
“
ENT
”
key.
（
Select from 1200, 2400, 4800, 9600,
19200, 38400
）
Use the
△
key to indicate " ", and press the
“
ENT
”
key.
（
Select from 7 bit, 8 bit
）
Use the
△
key to indicate " ", and press the
“
ENT
”
key. (Select from EVEN, ODD and NONE
）
Use the
△
key to indicate " ", and press the
“
ENT
”
key. (Select from 1 bit, 2 bit)
Setting is completed.
Returned to the Communication Function Setting
screen.
Display Operation Keys Description
ENT
PRINT
ENT
(Local address)
(Baud rate)
(Data length)
(Parity bit)
PRINT
ENT
(Protocol)
PRINT
ENT
ENT PRINT
PRINT
ENT
ENT PRINT
PRINT
ENT
(Stop bit)
［
Note
］
In the case of " Modbus-RTU
）
", Please set always the data length " ".