Toho Electronics TRM-10C, Instruction Manual, Page: 48 / 129

―
47
―
HXPRM10mnCT002E
(2) Engineering list print stopping procedure
①
Press the
“
PRINT
”
key.
②
Use the
“
PRINT
”
key to display “ ”. Then, press the
“
ENT
”
key.
③
Use the
“
PRINT
” key to select “ ”. Pressing the “
ENT
”
key stops engineering list
print. Engineering list print is stopped. And the display returned to it was prior to starting
engineering list print.
Fig. 6.8 Engineering List Print
ENGINEERING LIST
RUN CH／TAG ALM_PR
INT CH ON1
D_PR START INT
ON 00:00 1H
SYSC/ASYNC
ASYNC
PG_ADJ
Off
RUN.PRINT
SYNC
ALM_HYS TEMP
ON
℃
CH RJC μV(REFCH)
B.OUT OFFSET
FILTER
1 INT
ON 10.0
1.0000
2 EXT 805
ON 0.0
0.8000
COM_ADR 01
SPEED 9600BPS
DATA 8bit
PARITY NONE
STOP 1bit
DI 1:COMMENT1
2:MAN_PRINT
3:TIMEPRINT
Alarm Print Set Value
: ON 1(occurrence/recovery)
Logging Print Set value:
ON/OFF,
Start Time, Interval,
Printout: Sync./ASync.,
PG_ADJ: ON/OFF
Logging Print: ON
Start: 00:00
Interval: 1h
Printout: ASync.
PG_ADJ: OFF
RUN.Print : Sync.
Channel Number /Tag
Number Set Value
: CH
RUN/STOP
Internal/External
Switch Set Value
: INT (key)
Setting of RJC, constant value in
external RJC, Burnout
Protection, Offset, and Digital
filter value for Each Channel.
1CH
2CH
RJC : INT EXT
REF : None 805
μ
V
B.OUT : ON ON
Offset : 10.0 0.0
Filter : 1.0 0.8
Communication Set value
DI Function Set
value.
Effective with the
DI option.
Alarm Hysteresis
Set Value
: ON
Temperature Unit :
℃