―
38
―
HXPRM10mnCT002E
(12) Pushing up the Ribbon Cassette
Attach both sides of the ribbon cassette to the guide shaft. If the gear of the ribbon cassette is not
properly engaged with the printer, slide the printer slightly.
Fig. 5.25
Attaching to the Guide Shaft
(13) Putting back the Chart Holder
Put back the chart holder horizontally into the case until it is locked. (See Fig. 5.12 on Page 30)
(14) Moving down the Pen to Close the Door
Use the pen-up lever to move down the pen. Close the door and make sure that it is locked.
(15) Pressing the
“
RUN
”
key to Reset Operation
Ribbon
Guide Shaft
Attach both sides to the guide
shaft, one side at one time.
It clicks if properly engaged.