Model: TTT-710
8.3 Washing Water Flow Passage Maintenance and Inspection
- 91 -
(2) Washing water tube replacement
After performing 8.3(1) “Washing water flow passage inspection”, replace the washing water tubes,
as required.
①
Set the power switch to OFF.
⋅⋅⋅⋅⋅⋅
Set the power switch at the left-hand side of the product to
OFF.
②
Remove the piping cover.
⋅⋅⋅⋅⋅⋅
Remove the piping cover on the front (left-hand side) of the
product.
③
Remove the old tubes.
⋅⋅⋅⋅⋅⋅
Of the washing water tube (for tank), washing water tube (for
pump), and washing water tube (for washing reservoir), remove the tube that requires replacement.
Washing Water Tube Replacement
④
Replace the tube.
⋅⋅⋅⋅⋅⋅
Cut the new washing water tube (part code: 116E049) to the length of the
tube removed at step
③
and install it as it was originally.
＞＞
4.3(2) “Pure water tank
connection”
⑤
Return to original state.
⋅⋅⋅⋅⋅⋅
Install the piping cover on the front (left-hand side) of the product
as it was originally and set the power switch to ON.
Summary of Contents for TTT-710
Page 115: ... 114 ...
Page 117: ... 116 ...
