Toa TTT-710, Instruction Manual

Page: 17 / 118

Model: TTT-710 4.1 Installation Preparations
- 16 -
4. Preparations
4.1 Installation Preparations
Install the product main body at a flat place.
Provide an empty space of the following dimensions as installation space for the product main body
and the analytical instruments to be connected.
•
When using with X Series analytical instruments
⋅⋅⋅⋅
896 (W) × 584 (H) × 557 (D) mm
•
When using with R Series analytical instruments
⋅⋅⋅⋅
918 (W) × 584 (H) × 557 (D) mm
•
When using with G Series analytical instruments
⋅⋅⋅⋅
948 (W) × 584 (H) × 557 (D) mm
•
When using with Automatic Titrator AUT-701 (including Titration Burette ABT-7 1 unit)
⋅⋅⋅⋅
1076 (W) × 584 (H) × 557 (D) mm
•
When using with Automatic Titrator AUT-501 (including Titration Burette ABT-511 1 unit)
⋅⋅⋅⋅
1126 (W) × 584 (H) × 557 (D) mm
•
When using with dedicated Titrator TA-70, TS-70, or TP-70
⋅⋅⋅⋅
876 (W) × 584 (H) × 557 (D) mm
•
When using with Automatic Burette ABT-511
⋅⋅⋅⋅
886 (W) × 584 (H) × 557 (D) mm
Also provide an empty space of 100mm (10cm) or more between the product main body left side and
the analytical instrument or a wall to turn on or off the power easily.