Toa TTT-710, Instruction Manual

Page: 77 / 118

Model: TTT-710 7.2 Message Format
- 76 -
AR4: Raises the arm
AR5: Lowers the arm
* After the end of operation, an operation end command (M command) is sent from the turntable.
 Table movement
TA1CRLF
①
①
Identification codes
TA1: Moves the table to the 1specimen next position
TA2: Moves the table to the home position (moves to Table No. 1)
* When the arm is lower than the measurement beaker position, the table is moved after the arm is
raised.
* After the end of operation, an operation end command (M command) is sent from the turntable.
 Movement of table to specific No.
TO,002CRLF
① ②
①
Identification code TO fixed
② Table No. (001 to100)
* When the arm is lower than the measurement beaker position, the table is moved after the arm is
raised.
* After the end of operation, an operation end command (M command) is sent from the turntable.
 Washing mode operation execution
WC1CRLF
①
① Identification codes
WC1: Washing mode 1 operation
WC2: Washing mode 2 operation
WC3: Washing mode 3 operation
WC4: Washing mode 4 operation
WC5: Washing mode 5 operation
WC6: Washing mode 6 operation
WC7: Washing mode 7 operation
WC8: Washing mode 8 operation
WC9: Washing mode 9 operation
* The arm is moved lower than the washing reservoir position and the specified washing mode is
executed
* After the end of operation, an operation end command (M command) is sent from the turntable.