40
TT5MTP26-2
In
more
detail
. . .
Safety equipment
The machine has several pieces of safety equipment which reduce the risk of injury
when working.
Cutting-attachment and trimming guard
> The guards (D4/ D14) protect the operator against thrown objects during
operation.
> Use the grass trimmer only together with the trimming guard (D14) and cutting-
attachment guard (D4).
> Use the brush cutter only together with the cutting-attachment guard (D4).
> The cutting line cutter (D11) is integrated with the trimming guard (D14) and
shortens the cutting line (D13) to the necessary length (Fig. 21).
> Never use the machine without a guard or with a defective guard.
21
D11
D4
D4
D14
D13
D7
Harness
NOTE:
The harness improves working movement and enables the operator
to manage the job in a safer way and takes the strain away from the body.
Always wear the harness when working with the machine. Always turn
the machine off and wait until the attachment tool stops completely before
taking off the harness.
1. Place the harness (F5) over your left shoulder crossing the chest and back. The
quick-release must be located at the right hip (Fig. 22).
2. Clip the harness (F5) to the harness loop (A12) on the upper drive shaft tube (A13).
3. Adjust the length of the harness (F5) so that the weight of the machine is balanced
and the cutting attachment is approximately 10-15 cm above the ground.
Machine functions
