34
TT5MTP26-2
Getting
Started . . .
Filling up fuel and oil
WARNING!
This machine is not supplied with petrol-oil mixture in the engine!
Before operating this machine it is essential to fill it with petrol-oil mixture!
This machine is equipped with a 2-stroke engine. The fuel and oil tank are combined
and it is essential to fill a fuel-oil mixture before operating this machine. Observe the
technical specifications for suitable fuel and engine oil.
WARNING!
Fuel and oil are highly inflammable! Fumes will
explode if lit! Ensure that there are no naked flames around the
machine! Do not smoke while filling fuel and oil!
NOTE:
To avoid spillage and to filter out debris, use a funnel with filter to fill
the fuel mixing bottle (F6) and the fuel tank (A6).
1. Place the machine on a stable, level surface with the fuel tank cap (A5) facing
upwards. We recommend laying a non-flammable sheet under the machine.
2. Pour a regular-grade unleaded petrol and a quality engine oil for air cooled 2-stroke
engines in the supplied fuel mixing bottle (F6) respectively via the 2 openings. Use
the scale markings on different sides for the desired ratio for petrol:oil. For example,
fill petrol to scale marking “10” first, and then fill 2-stroke oil to scale marking “10”.
This indicates a correct ratio of 40:1 when using the scale 40:1.
=
100 ml
+
2.5 ml
=
40:1
200 ml
+
5 ml
=
300 ml
+
7.5 ml
=
400 ml
+
10 ml
=
3. Tilt and shake the bottle thoroughly to mix the fuel.
Before you start
