5
TT5MTP26-2
Getting
Started . . .
> Keep handles dry, clean and free from oil and grease. Greasy, oily handles are
slippery and may cause loss of control.
> Do not operate the machine if you are tired or ill, under the influence of drugs, alcohol
or medication.
> When the machine is switched off, make sure the cutting attachment has stopped
before setting down the machine.
> Do not operate the engine in a confined space where dangerous carbon monoxide
fumes can collect.
> Operate the machine only in daylight or in good artificial light.
> Do not touch any moving parts before they have come to a complete stop.
> Operate the machine in a recommended position and only on a firm, level surface.
> Never operate the machine on a ladder or other insecure support.
> Operate the machine only at reasonable hours – not early in the morning or late at
night when people might be disturbed.
> Make sure that the ventilation openings are kept clear of debris.
> Make sure that the air intake of the combustion engine is clear. Keep the air intake
free of dust, dirt particles, gases and fumes.
> Never use the machine without the air filter installed.
> Check for signs of wear or damage before each use, after any impact or if the machine
has been dropped. Repair the machine if necessary.
> Stop the engine, disconnect the spark plug connector:
• before clearing blockages;
• before cleaning or servicing the machine;
• after striking a foreign object. Inspect the machine for damage and make repairs
before restarting and operating the machine;
• if the machine starts to vibrate abnormally (check immediately);
• whenever you leave the machine unattended;
• before refuelling.
Additional safety warnings for brush cutter and grass trimmer
> Before starting the engine, make sure the cutting attachment is not contacting any
objects.
> Thoroughly inspect the area where the machine is to be used and remove all stones,
sticks, wires, bones and other foreign objects.
> Avoid operating the machine in wet grass or take additional precautions to avoid
slipping.
> When operating on a slope, always stand at a lower level than the machine. Never
cut or trim on an icy, slippery hill or slope.
> Do not operate the cutting attachment when crossing surfaces other than grass, and
when transporting the machine to and from the working area.
> Take care against injury from a cutter fitted for trimming the cutting line length. After
extending the cutter line always return the machine to its normal operating position
before switching on.
Safety information
