39
TT5MTP26-2
In
more
detail
. . .
Intended use
This 26 cm
3
5 in 1 Multi tool TT5MTP26-2 is designated with a maximum power output of
0.75 kW. Depending on the attached accessory this machine is intended to be used as:
>
Brush cutter:
With the tri-arc cutting blade and cutting-attachment guard attached,
the machine is intended to cut heavier weeds, brush and similar vegetation with a
thickness of up to 20 mm
20 mm.
>
Grass trimmer:
With the string trimmer head, cutting attachment guard and trimming
guard attached, the machine is intended to cut smaller types of weed, lawn grass
or similar soft vegetation.
>
Hedge trimmer:
With the hedge trimmer attachment attached, the machine is
intended to trim wide and high hedges, bushes and shrubs.
>
Pole pruner:
With the pole pruner attachment attached, the machine is intended to
cut branches with a thickness of max. 180 mm.
WARNING!
The machine must be used by an experienced operator* having
read and understood the safety requirements provided within this instruction
handbook using appropriate personal protective equipment (PPE)!
This machine must not be used for cutting other materials, such as plastic, stone,
metal, wood that contains foreign objects, or materials that are harmful to health. This
machine should not be used for cutting unusually thick grass or vegetation, wet grass,
or shredding leaves. The brush cutter should not be used to level ground elevations for
example molehills.
For safety reasons it is essential to read the entire instruction handbook before first
operation and to observe all the instructions therein. This machine is intended for private
domestic use only, not for any commercial trade use. It must not be used for any purposes
other than those described.
* A trained operator is a person who has the competence and knowledge in the use
and hazards associated with using a machine as well as the precautions to be taken to
limit these hazards.
Machine functions
