22
TT5MTP26-2
Getting
Started . . .
Assembly
WARNING!
The machine must be fully assembled before operation!
Do not use a machine that is only partly assembled or assembled with damaged
parts!
Follow the assembly instructions step-by-step and use the pictures provided
as a visual guide to assemble the machine easily!
Disconnect the spark plug connector before assembly! Reconnect it after
assembly (see "Maintenance").
NOTE:
Take care of small parts that are removed during assembly or when
making adjustments. Keep them secure to avoid loss.
NOTE:
To prevent the parts from coming loose during the operation, some
parts are with reverse threads: turn clockwise to loosen, and turn anti-clockwise
to tighten. Read carefully the instructions in this instruction handbook for the
correct tightening/loosening direction.
Assembling the front handle and barrier bar
1. Loosen the 4 pre-assembled bolts on the front handle (A14) using the multi-tool II (F2).
Separate the front handle (A14) and the rubber damper from the barrier bar (A15).
2. Attach the rubber damper to the upper drive shaft tube (A13).
3. Clamp the front handle (A14) and the barrier bar (A15) onto rubber damper. Adjust
the positions of the parts so that the pin engages into one of the 3 holes (Fig. 1).
4. Secure the front handle (A14) and the barrier bar (A15) with the 4 bolts using the
multi-tool II (F2).
Before you start
