manualshive.com logo in svg

Titan 5059340256061, Manual

Share
Download
Titan 5059340256061 Manual Download Page 70

70

TT5MTP26-2

In

 more 

detail

 . . .

Engine does 

not reach

the maximum 

speed.

Air filter is soiled?

Clean the air filter.

Incorrect fuel or incorrect 

mixture?

Stop the engine, empty tank, 

then fill up with the correct 

mixture of fuel to oil (40:1).

Carburetor setting not correct?

Have a qualified person adjust 

the carburetor.

Bad cutting 

performance.

Inappropriate cutting attachment 

used?

Select the proper cutting 

attachment for the use.

Wrong cutting height?

Adjust the cutting height.

Cutting/trimming guard clogged? Clean the cutting/trimming 

guard.

Cutting blade is not sharp 

enough?

Sharpen or replace the cutting 

blade.

Excessive 

vibration/

noise or 

smoke.

Cutting attachment broken?

Replace the broken attachment.

Flanges/nut loosened?

Stop the engine and re-tighten 

the loosened fasteners.

Incorrect fuel or incorrect 

mixture?

Stop the engine, empty tank, then 

fill up with the correct mixture of 

fuel to oil (40:1).

Brush cutter/grass trimmer

Problem

Possible cause

Solution

Bad cutting 

performance.

Inappropriate cutting attachment 

used?

Select the proper cutting 

attachment for the use.

Wrong cutting height?

Adjust the cutting height.

Cutting/trimming guard clogged? Clean the cutting/trimming 

guard.

Cutting blade is not sharp 

enough?

Sharpen or replace the cutting 

blade.

Excessive 

vibration/

noise or 

smoke.

Cutting attachment broken?

Replace the broken attachment.

Flanges/nut loosened?

Stop the engine and re-tighten 

the loosened fasteners.

Incorrect fuel or incorrect 

mixture?

Stop the engine, empty tank, then 

fill up with the correct mixture of 

fuel to oil (40:1).

Troubleshooting

Summary of Contents for 5059340256061
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands