30
TT5MTP26-2
Getting
Started . . .
Assembling the cutting blade
The tri-arc cutting blade (D7) is used together with the cutting-attachment guard (D4)
only. Use the tri-arc cutting blade (D7) for cutting heavier weeds, brush and similar
vegetation with a thickness of up to 20 mm
20 mm.
CAUTION! Risk of cuts!
Tri-arc cutting blade (D7) is very sharp. Wear protective
gloves when handling the tri-arc cutting blade (D7).
1. Press the locking tabs on both sides and pull to detach both ends of the trimming
guard (D14) from the cutting-attachment guard (D4) (Fig. 11 and 12).
11
12
D14
D4
2. Insert the multi-tool II (F2) under the center buckle to disengage it and remove the
Insert the multi-tool II (F2) under the center buckle to disengage it and remove the
multi-tool II (F2) (Fig. 13).
multi-tool II (F2) (Fig. 13).
F2
13
Before you start
