Timewave DSP-D300, Manual

Page: 60 / 112

Appendix: Installation
Installing the DSP-D300 hardware and software.
Getting Started
Check the Package Contents
The DSP-D300 comes with the following materials:
Package Contents
•
DSP-D300 unit
•
Windows Software CD
•
13V DC, 700 mA Power Supply
•
DSP-D300 Manual
•
2 RS-232 serial cable assemblies – DB-9m to DB-9f
•
1 Ethernet cable assembly RJ-45 to RJ-45 – 6 ft.
•
1 Audio Data cable assembly RJ-45 to open end – 6 ft.
•
1 Audio monitor cable assembly –
1
/
8
” (3.5 mm) stereo plug to
1
/
8
” (3.5 mm)
stereo plug – 6 ft.
•
1 USB cable assembly USB “A” to USB “B”
Check to make sure that they are all present.
Other Hardware Needed
The DSP-D300 is designed to interface with existing hardware. Make sure that
the following Hardware is present:
1.
A Windows based PC.
Computer System Requirements
•
Windows 98SE, Windows ME, Windows 2000, Windows XP, Windows
2003, or Windows Vista. Windows XP or Vista recommended
•
Minimum Pentium III 650 MHz, Recommended Pentium 4 1.2 GHz
•
COM port (RS-232) and/or Ethernet port
•
USB port, version 1.1 or higher
•
15 MB Free disk space
•
USB “A” to “B” Device cable needed for USB support
•
16-bit Soundcard with
1
/
8
” (3.5 mm) audio out jack (recommended)
2. A radio receiver.
3. Tools to connect Audio Data cable to Radio Receiver.