Timewave DSP-D300, Manual

Page: 25 / 112

iflows
iflows [
address
[
setting
]]
Parameter:
address
The address from 0-3071 to set. If not given, then the entire
filter table will be shown.
setting
Turn it off or on or forces an update. If this is not given,
then the current setting will be returned.
Description:
Controls the IFLOWS filter.
Notes:
For the setting, “ON”, “YES”, “ENABLE”, and “1” may be used to enable to address. If the entire
filter is NOT selected, than updates will be forced before setting the addresses.
This is not a real-time update. There may be a lag of up to 10 minutes for updates. This includes
reboot.
last
last
Description:
Lists the recorded system events.
Notes:
The last 32 system events are recorded. There are three fields in the system event database: User,
Type, and Time. If the NIST time check is not enabled, the time may be invalid.
Field Possible Values Description
User
Username
,
root,
System Boot
The name of the user who created
the event.
Type SSH Remote,
Diagnostic
Remote or Local operation
Time The time (UTC)
levelhistory
levelhistory
Description:
List the last 40 recorded dB levels.
Notes:
dB levels are not updated in the shell more than a few times a second.
25