Timewave DSP-D300, Manual

Page: 58 / 112

58
Duplicates
Sometimes there are duplicates in a log file. A gauge occasionally sends two
packets right after another that have the same data. Clicking on “Dups” will
automatically remove duplicate entries.
Source
When set, only the sources listed will be allowed. For example, on the
CommReadTW log, maybe only input from port E3005 is wanted for comparison.
Enter E3005 into the Source Filter box and click “Apply”. To reset, click on
“Import” again to re-import the log.
Frequency
After a Tone file is loaded, the frequency may be selected to limit matches to a
certain frequency. Supported are 600, 1080, 1560, 2040, and 2560. If a tones file
is not loaded there is no way of determining frequency for a specific gauge, so
this should be left at “All Frequencies”.
Time
After importing, the date range will reflect the maximum date ranges of the logs
imported. If a subset range for comparison is desired, select it before clicking on
“Compare”.