Timewave DSP-D300, Manual

Page: 49 / 112

Date Time Region xxx, Gage xxxx report xx in xxx on port xxx [xx xx xx xx]
Examples:
08/25 13:57:57 Region 0, Gage 6923 report 38 in EIF on port C300 [CB 6C 13 24]
08/25 13:57:57 Region 5, Gage 6923 report 38 in EIF on port 5 [CB 6C 13 24]
08/25 13:57:57 Region 5, Gage 6923 report 38 in EIF on port E3000 [CB 6C 13 24]
The misspelling of gauge is part of the standard format. For the D300 the
port “D300” has been defined. For TCP ports, the format “Exxxx” for the
TCP port has been defined.
Ports
The ports tab is for the D300 baud rates and satellite connection type.
Figure 14: Control300 Port Options
Bypass
Bypass the packet checking system and send packets that are
not certified to the satellite port. This will also disable the
filter. See
Setting the IFLOWS filter
.
Disable
Error-Correction Disable the Error-correction in the DSP. This will send the
packet even if it is of a bad format or incorrect length. This
option is for use with 3
rd
party correction software.
COM1 Baud
Rate Set the baud rate for the local COM port.
COM2 Baud
Rate Set the baud rate for the satellite COM port.
*Note: These are not to be confused with the PC’s COM port
that is available when the USB is connected. There is no baud
rate setting for the PC’s Virtual CDC COM Port.
Setting the IFLOWS filter
The IFLOWS filter can be edited from Control300.
49