Timewave DSP-D300, Manual

Page: 50 / 112

Show/Edit the filter.
Figure 15: DSP-D300 Control300 Filter Editor
Choose the range to edit from the tree on the left. Adjust the filter by clicking on the
address to turn off or on. To disable or enable all addresses, click on Enable All or
Disable All. Enable Range and Disable Range work just on the selected range.
The filter may be saved for future use. Choose Save to save the filter. Load reads it back
in.
Check on OK to activate the changed filter. This will implemented immediately, unlike
the command line updates (see page 15,
IFLOWS
).
Changing the Receive Frequency
The DSP-D300 allows for the loading of different DSP “filters” that receive different
frequencies of telemetry data. This option is found in the DSP Settings.
Figure 17: DSP-D300 Control300 Frequency Editor
50