Timespace X300 Mark 2, Instruction Manual

Page: 22 / 185

X300 Instruction Manual Chapter 3 - User Guide – X300 Menu System
11
REC SPECIFIED CAMS
- This sets the X300 to record the cameras in the manner specified. The
alternative setting is REC CONNECTED CAMS which would only record the cameras that the X300 has
detected as being connected. This allows the X300 to be configured with recording RATE and QUAL
prior to cameras being installed, and then t o be deployed with cameras without reconfiguring the
menu, just plug & play.
3.1.1.1 Global (total) IPS limit
The global (total) recording resource available on the X300 is 200IPS.
For each recording mode, the total number of configured IPS (images/sec) is displayed along with the
maximum. Any adjustment to the camera IPS, image quality or number of recorded cameras will
affect the REC TIME. The REC TIME is an indication of the number of Days, Hours, Minutes that the
X300 will record for based upon the current settings and entire installed cartridge capacity.
HINT : A “copy down” feature is available for configuring multiple camera settings. The settings for
the currently selected camera will be copied down to all remaining cameras, subject to the global
IPS limit. Press 0 to copy down.
By default all cameras are set to record in NORMAL RECORD mode, enabling quick deployment -
just connect cameras and press the record button.
NB: the X300 is set to default record at power up. Options to enable/disable recording at power-
up are found in the SETTINGS > ADVANCED menu POWER STATE .