X300 Instruction Manual
Chapter 3 - User Guide – X300 Menu System
40
3.1.6
Motion Detection
Motion Detection is used to monitor defined areas for levels of motion above a defined threshold
and then to trigger the X300 recording modes;
or
Motion Detection is set up by using the
tool to specify areas of each camera view(s)
which are to be monitored for motion, and selecting the level and duration of change which must
occur to produce a motion event.
When MOTION DETECTION is set up, the RECORD LED on the
motion is triggered, the LED will remain on (solid) for the duration of motion (plus any configured
post-trigger time), then return to flashing.
Motion Detection Quick Set-up
:
1.
Select the camera(s) you wish to monitor. Set these to ON in the
2.
Also in the CAMERA SETUP menu, set the camera(s) sensitivity using PERCENTAGE and
DURATION.
3.
In the
menu, move/size the cursor box to select the area(s) to be monitored.
4.
Select the recording mode you wish to trigger, ie NORMAL, TIMER or ALARM in the MOTION
DETECTION menu.
5.
Press record.
See the following pages for more detailed instructions for
using the
NB
: Motion Detection is used as a trigger to start of one of the recording modes; it is not a
recording mode on its own.
Summary of Contents for X300 Mark 2
