Timespace X300 Mark 2 Instruction Manual Download Page 45

Page: 45 / 185

X300 Instruction Manual

Chapter 3 - User Guide – X300 Menu System

3.1.4.5

SD Card File System Check

SD CARD FILE SYSTEM CHECK menu configures whether the file system is checked and/or corrected
at power-up and whether a system log is created.

ON POWER SWITCH ON – options are NO CHECK, QUICK CHECK AND CORRECT, FULL CHECK AND
CORRECT.

PERFORM CHECK ONLY NOW – will check the files and file system and report any errors but will not
attempt to fix anything.

PERFORM CHECK & CORRECT NOW – will perform a file and file system check and fix any errors that
are found. It also rewrites the FAT and BOOT sectors.

: No files/data are deleted during the CHECK & CORRECT function.

Summary of Contents for X300 Mark 2


























































































































































































Search results

Summary of Contents for X300 Mark 2

Reviews:

Related manuals for X300 Mark 2

Brands by name

Popular brands

Timespace X300 Mark 2, Instruction Manual

Search results

Summary of Contents for X300 Mark 2

Reviews:

Related manuals for X300 Mark 2

Brands by name

Popular brands