Timespace X300 Mark 2, Instruction Manual

Page: 178 / 185

X300 Instruction Manual Chapter 9 - Appendices
167
Control Commands
#RECSTART<R> - start recording
#RECSTOP<R> - stop recording
#STOP<R> - stop playback
#PLAY<R> - start playback (standard)
#REPLAY<R> - play backwards (standard)
#WIND<R> - fast forwards (standard)
#REWIND<R> - rewind (standard)
#XPLAY_<FACTOR><R> - plays at the specified factor speed (-/+)
#CAMERA_<1-16><R> - camera to control
#LIVEVIEW<R> - switch to live view
#AUTOLIVEVIEW<R> - switch to live view automatic mode
#JOGFORWARD<R> - one frame backwards
#JOGBACKWARD<R> - one frame forwards
#GOTONEWESET<R> - go to the newest recording
#GOTOOLDEST<R> - go to the oldest recording
#GOTO_<HH:MM- DD/MM/YY><R> - go to time DD:MM:YY_HH:MM
#GOTO_<HH:MM:SS-DD/MM/YY><R> - go to time DD:MM:YY_HH:MM:SS
#SETTIME_<HH:MM:SS><R>
- sets the time
#SETDATE_<DD/MM/YY><R> - sets the date
#GETTIME<R> - gets the time
#GETDATE<R> - gets the date
#NEXTFILE<R> - when playing, skips to the beginning of the next file
#PREVIOUSFILE<R> - when playing, starts at the beginning of the currently
playing file. When stopped and #PREVIOUSFILE is
issued twice, followed by a play, the previous file will
begin playing from the beginning.
#GETFILETIMEDATE - gets the current playing position of the currently play
file.
#GETSTATS
- returns statistics
#DELETEALLREC - removes all recording files from disk
#ALARMOUT<1-4>_0/1 - Turns ALARMOUT LED Output ON (1) or OFF (0)
#ALARMOUT<1-4><R> - Returns the status of ALARMOUT, 0 or 1
#ALARMIN<1-10><R> - Returns the status of ALARMIN, 0 or 1
#ALARMIN<1-10>1_0/1 - sets the state of the Digital input 1 ON(1) or OFF(0)
#CAMTEXT_<1-16>_<TEXT><R> - writes text to the console at record time, Char 255
moves to the beginning of a new line. Maximum 49
characters per camera.
#DISKSTATUS - returns #DISKREMOVED or #DISKIN
#MODESTATUS - Returns #RECORD, #PLAY or #IDLE
#SETCAMTEXT_<1-16>_<TEXT><R> - sets the camera text. This is fixed to 12 characters
per camera.
#SETFILETEXT_<TEXT><R> - sets the filename text. Max 12 characters.
#LOGRESET<R> - resets the service log
#LOGREAD<R> - reads the service log and returns up to the 10 latest entries