Timespace X300 Mark 2, Instruction Manual

Page: 134 / 185

X300 Instruction Manual Chapter 6 - Installation Guide
123
6.3 Warnings

The use of hard disk cartridges other than those supplied by Timespace Technology will
invalidate the warranty of the X300 recorder and will constitute a breach of the X300
operating software copyright.

The purchase of the Timespace USB kit includes the necessary license for use of PCLink
Suite software on one PC, including free of charge updates. Reasonable use allows a
second installation on a portable computer provided both installations are not used
simultaneously. Timespace Technology does not authorise the unlicensed usage of PCLink
Suite software.

The X300 recorder must always be mounted so that there is a free flow of air around it. If it
is mounted in an enclosure, it is essential that adequate ventilation is provided, and it is
recommended that a fan is incorporated in the enclosure design. See further details for
the
X300 Mark 2 and the X300-16M .

Hard disk cartridges are sensitive to shock, vibration and humidity and must be used within
operating temperature range as detailed in the X300 specification in the
Appendices .

It is highly recommended that recording is stopped before power is removed from the
X300 to avoid loss of data. It is also recommended to stop recording before the cartridge or
SD card is removed.

Cartridges should be safely removed from windows operating system environment prior to
removing power/USB cable. Data loss or corruption may occur if this is not followed.

Do not wet the product when cleaning.

This product contains a lithium battery. Do not recharge, open, heat or dispose of in fire.
Dispose of according to local regulations.

X300 may become unusable if power to the unit is lost during a software upgrade.