Timespace X300 Mark 2, Instruction Manual

Page: 53 / 185

X300 Instruction Manual Chapter 3 - User Guide – X300 Menu System
42
3.1.6.1 Motion Detection Camera Setup
X300 Mark 2 Motion Detection Camera Setup X300-16M Motion Detection Camera Setup
CAMERA SETUP allows a selection of cameras to be monitored by the motion detection system.
Cameras that are OFF are ignored by motion detection.
PERCENTAGE is used to set the level of change that must occur between successive frames to
produce a motion event.
DURATION is the time period for which consecutive motion events must occur to trigger the motion
system.
If any individual camera is set to
OFF in the CAMERA SETUP, it will not be controlled by MOTION
DETECTION even if the record mode is set to YES within the MOTION DETECTION menu.
Example, if:
NORMAL RECORDING is set to record on cameras 1 – 4
NORMAL RECORDING is set to YES in MOTION DETECT MENU
Cameras 1 & 2 are set to YES in MOTION DETECT CAMERA SETUP
Cameras 3 & 4 are set to NO in MOTION DETECT CAMERA SETUP
then; normal recording will be constant on cameras 3 & 4. Cameras 1 & 2 will only record when
motion detection is triggered (for the duration of motion plus the post-trigger time).
NOTE : Users will need to define the PERCENTAGE and DURATION as required in each individual
case. The BAR GRAPH tool can assist in determining the required PERCENTAGE – see following
pages.