Pre-Installation – Location
EI Residential Solar Solution Installation Manual |
3
Pre-Installation
Location
The default enclosure layout for an EI system is, from the top down:
•
Inverter
•
Link
•
Battery management system (BMS)
•
Battery (one or two). Additional batteries may be placed to the right of the main
cabinet.
Locate EI components:
•
In a well-ventilated, easily accessible location.
•
On a flat surface against a solid wall without tilt.
•
Sheltered from direct sunlight and precipitation. The ambient temperature should be
below 50°C.
•
Away from antennas or other sources of strong electromechanical interference.
•
Above potential flooding.
•
With a minimum 300mm clearance around the top and sides.
When installing multiple batteries, consider that expansion connections are on
the right side of the main cabinet.
