Overview – Safety
EI Residential Solar Solution Installation Manual |
2
Safety
The EI system must be installed and maintained by qualified personnel in accordance with local
electrical codes. In addition:
•
Components must operate within the technical specifications listed in their
•
Failure to follow instructions herein may cause equipment damage not covered by the
warranty.
•
Use only copper conductors rated 75°C or higher. Do not use fine-stranded conductors.
•
Unused conduit openings must be properly sealed. Connected conduit must use
appropriate fittings. Tigo EI product enclosures are rated IP65.
•
Always wear appropriate PPE and use insulated tools.
These safety symbols appear in the manual:
A hazardous situation which could result in serious injury or loss of life.
A hazardous situation which could result in minor or moderate injury and
damage to the product.
An important operational note.
These symbols appear on Tigo enclosures:
Risk of electrical shock.
Risk of burns.
Check the operating instructions.
Caution, the inverter may retain high voltage for up to five minutes after
disconnection.
Avoid tampering.
Observe caution.
