Installation – Install TS4 MLPE
EI Residential Solar Solution Installation Manual |
21
Install TS4 MLPE
To install TS4 devices and map them for the Tigo Energy Intelligence app:
1.
Attach a TS4 device to a PV module frame using the silver clips. If using frameless
modules, remove the clips and bolt the TS4 directly to the PV rail with M8 bolts. No
additional earthing is required.
You must connect the shorter TS4 input leads to the PV modules first. Failure to
do so can damage the TS4 unit.
2.
Remove the barcode sticker on the TS4 and place it on the PV array map located at the
end of the EI Inverter Quick Start Guide. Ensure the sticker matches the physical
location of the module on the roof.
