Installation – Place Batteries
EI Residential Solar Solution Installation Manual |
10
•
Earthing wire (1200 mm)
•
Battery base
•
Cover brackets (2)
•
Wire protector rings (4)
•
M4 screws (8)
•
Wall bracket accessories
•
Battery module to BMS power cable (2500 mm, optional)
An EI system includes up to four batteries. The default configuration is to stack one or two
batteries directly below the inverter, link, and BMS components. Because connections are on
the right side of battery enclosures, additional batteries are most conveniently stacked to the
right of the main cabinet.
To position one or more batteries:
1.
Place the battery base 20mm from the wall and adjust levelers if necessary.
2.
Place a battery on the base.
